uxcell U625ZZ Nylon U Groove Bearings 5x24x7mm Chrome Steel 5pcs | Double Metal Shielded, (GCr15) Ball Bearings

NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.Description:Single-row, pre-lubricated, normal accuracy.Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.Carbon Steel made with heat treating, provides high and uniform hardness, good wear resistanceSuitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.Selection Guide:Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification:Model: U625ZZShielded Type: Double ShieldedInner Race/Outer Race Material: Chrome Steel / NylonBall Material: Chrome SteelCage Material: Stamping SteelInner Diameter (d): 5mmOuter Diameter (D): 24mmThickness (B): 7mmGroove width: 3.8mm Groove depth: 2mmAccuracy Class: P0 (ABEC1)Noise Level: Z2Number of Pack: 5Pcs

• U625ZZ (I.D.=5mm, O.D.=24mm, Thickness=7mm)
• U625ZZ bearings are shielded on both sides to keep lubricant in
• Chrome Steel long-life bearings, smooth and low noise
• ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
• Number of Pack: 5Pcs